FCLO
Advantages
CKD-FCLO series is an opening type fiber laser cutting machine with 3000*1500mm cutting scope, including 500W, 1000W and 3000W fiber laser configuration, has the advantages as below:
Integration design without too much spare parts outside, smaller space, less costs.
600℃heat treatment, 24 hours cooling in the oven, 8 meters gantry milling, high ateprecision, make sure 20 years usage without deformation.
Waste collection device could be moved both sides which have no special request formachine location.
Air cylinder helps to feed sheet metal easily and prevent scratching.
Separated gas supply with independent pressure valve assures good cutting.
Auto-changefor gas when cutting different sheet metal.
PressureAlarm. When there is no enough gas with low pressure, alarm will be drawn yourattention.
Low pressurehole punching is special function.
Configuration
CKD-FCLO series is equipped with a Raytools cutting head. All construction sub-units, such as fiber laser resonators, CNC (C Computer Numeric Control) controls, program software, handling equipment, etc. aresupplied by world class quality manufacturers.
The principal characteristics of CKD-FCLO series fiberlaser cutting equipment are:
Compact design facilitating a wide variety of applications.
CNC with laser control function.
Resonator with reflective sensors.
Simple program for pieces and cutting plans with automatically adaptedfeed speed and power output for each piece, using CNC.
Highly dynamic equipment.
Rigidity: high strength transfers due to stability of construction.
Durability: enclosed drivers.
Accessibility: spare parts service.
1.Laser generator
|
| Features are as follows: 1. Direct control of all the fiber laser functions 2. Synchronized control of the laser source 3. Overall power control 4. High speed perforation 5. Edge machining function 6. Cutting data library 7. High speed fiber laser cutting |
| ||
2. Cutting head |
| 1. Manual focal position adjustment. 2. No-contact height sensor. 3. Horizontal lens adjustment. |
3.Control system |
| Cypcut Control system and software with English version, applicable insert files with DXF. Or AI, IGS format. Drawing in the software is also okay. Software with fly cutting mode for cutting same products for save time. With Nesting function, autonomic compose type for saving materials by saving spaces. |
4.Cooling system |
| Professional cooling systems, refrigeration temperatures are shown in table, the water temperature in excess of the prescribed temperature refrigeration unit automatically when cooling, refrigeration unit automatically stops when the water temperature below the specified temperature refrigeration. |
5.Transmission system |
| Rack and pinion system, Taiwan KH-TST |
6. Driving system |
| 4 sets of Japanese YASKAWA servo motors. (X axis 850w, Two Y axis each of them is 1300w, Z axis 400w) Gantry dual drive structure, high damping body, good rigidity, can withstand high speed and acceleration. Imported AC servo system and drive systems, rack drive imports, linear Guide, ensure the high speed, high precision, high reliability |
7. Oil Injection system |
| After using some time, Rack & Pinion and guide rails always need maintained by inject oils. Make sure the machine keep moving fluently and in good precision |
8. Electric Control box |
| 1.Control board: Cypcut 2.Servo motor driver: Yaskawa Japan brand: 3.Relay: APT brand 4.MCB board: Chint 5.Contactor: APT 6.Laser power supply: China brand 7.Height control:Cypcut BSS100 . V .30 8.Computer: Advantech industrical computer 610L |
Processing Ability
Material | Thickness | Auxiliary gas |
Carbon steel/ Iron | ≤6mm Maximum (≤4m is best effect) | Oxygen |
Stainless steel | ≤3mm Maximum | Nitrogen |
Galvanized sheet | ≤3mm Maximum | Nitrogen or Oxygen |
Cutting Parameters
Material | Thickness | Speed（m/min） | Air Pressure（MPA） | Gas | Cutting focus |
SS | 0.5 | >18 | 1 | N2 | 0.6 |
1 | 8.4~12 | >1.1 | N2 | 0.6 | |
2 | 1.8~2.4 | >1.8 | N2 | 0.6 | |
3 | 0.84~1.2 | >2.0 | N3 | 0.6 | |
CS | 1 | 8.4~12 | 1 | O2 | 1 |
2 | 3~4.2 | 0.6~0.8 | O2 | 1 | |
3 | 1.5~2.1 | 0.25~0.4 | O2 | 1 | |
4 | 1.2~1.5 | 0.15~0.2 | O2 | 1 | |
5 | 0.9~1.2 | 0.15~0.2 | O2 | 1 | |
6 | 0.72~0.96 | 0.1~0.2 | O2 | 1 |
The following documents will be supplied with the machine:
Copies of the Machine Instruction Manual:
CE conformity declaration.
Delivery Protocol.
Software manual.
Data backup
Environmental conditions
The temperature range at the workplace must be between 15-35 degrees C.
The system components must not be exposed to direct sunlight.
In the case of tropical climatic conditions or if the temperature of the workplace risesabove 35℃, it is recommended that theequipment should be housed within an air-conditioned space/room.
The Dew Point conditioning of the ambient air should be less than 10 degrees C in order to prevent condensation in the refrigerated parts of the machine.
It is recommended that the machine should be installed on a vibration-free floor.
Vapors resulting from paint or solvent injection can be absorbed by the laser beam andcan adversely affect the functioning of the system. For this reason, contactwith the laser beam by such vapors may constitute a high risk of explosion.
CuttingSamples
Packing
1500*3000mm fiber laser cutting machine dimension | |||||
Model | Machine lathe bed (m) | Electrical Control box | water chiller (m) | voltage regulator (m) | container |
CKD-FCLO-500 | 5*2.4*1.95 | 1.283*0.949*2.046 | 0.904*0.683*1.175 | 0.55*0.45*1 | 20’GP |
| CKD-FCLD-1000 | 5*2.4*1.95 | 1.283*0.949.2.046 | 0.904*0.683*1.175 | 0.55*0.45* | 20'GP |
CKD-FCLO-3000 | 5*2.4*1.95 | 1.283*0.949*2.046 | 0.904*0.683*1.175 | 0.55*0.45*1 | 20’GP |
